Gate Valves

Pegler

Ductile Iron Gate Valve.
BS EN 1171:2002 PN16, EPDM Wedge

Ductile Iron Gate Valve.
BS EN 1171:2002 PN16, EPDM Wedge

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) ex VAT
DN50V850101121505022050437006£272.54
DN65V850101121515022050437396£272.54
DN80V850101121525022050437556£311.94
DN100V850101121535022050437716£393.18
DN125V850101121545022050437877£567.54
DN150V850101121555022050438034£658.44
DN200V850101121565022050438195£1221.28
DN250V850101121575022050438423£2311.71
DN300V850101121585022050438584£2590.77
CodeDescriptionABKg
112150DN50 V85017824013.0
112151DN65 V85019026517.0
112152DN80 V85020332319.0
112153DN100 V85022936525.0
112154DN125 V85025441334.0
112155DN150 V85026747740.0
112156DN200 V85029258568.0
112157DN250 V850330710101.0
112158DN300 V850356789137.0
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
DN50V85011215013.0013.000.00
DN65V85011215117.0017.000.00
DN80V85011215219.0019.000.00
DN100V85011215323.8923.890.00
DN125V85011215434.0034.000.00
DN150V85011215540.0040.000.00
DN200V85011215668.0068.000.00
DN250V850112157101.00101.000.00
DN300V850112158137.00137.000.00
SizePattern No.CodeKv m3/h
DN50V850112150230
DN65V850112151360.0
DN80V850112152519.0
DN100V850112153923.0
DN125V8501121541443.0
DN150V8501121552077.0
DN200V8501121563693.0
DN250V8501121575771.0
DN300V8501121588310
Pegler Yorkshire reserve the right to change specifications

Valves and Fittings

Pegler Yorkshire Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler Yorkshire and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

SizePattern No.CodeWRAS V850 Gate Valves
DN50V850112150approved by WRAS V850 Gate Valves
DN65V850112151approved by WRAS V850 Gate Valves
DN80V850112152approved by WRAS V850 Gate Valves
DN100V850112153approved by WRAS V850 Gate Valves
DN125V850112154approved by WRAS V850 Gate Valves
DN150V850112155approved by WRAS V850 Gate Valves
DN200V850112156approved by WRAS V850 Gate Valves
DN250V850112157approved by WRAS V850 Gate Valves
DN300V850112158approved by WRAS V850 Gate Valves

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
DN50V850112150SEP
DN65V850112151SEP
DN80V850112152SEP
DN100V850112153SEP
DN125V850112154SEP
DN150V850112155SEP
DN200V850112156SEP
DN250V850112157SEP
DN300V850112158SEP
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyDuctile Iron
Body Seat RingGunmetal
BonnetDuctile Iron
Bonnet GasketEPDM
StemStainless Steel
WedgeEPDM
Wedge NutGunmetal
Gland FlangeDuctile Iron
GlandDuctile Iron
Gland PackingGraphite Non - Asbestos
Stuffing BoxDuctile Iron
Stuffing Box GasketCompressed Graphite
HandwheelDuctile Iron
  
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesnononononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Technical Suitability

© 2017 Pegler Yorkshire. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement

PY Blog RSS RSS twitter facebook link in youtube
Aaberts Industries