Pegler Yorkshire

Pegler Yorkshire takes the heat out of the Thermostatic Valves Market with two valves in one

As a recognised innovator and market leader in the field of Thermostatic Mixing Valves (TMV), Pegler Yorkshire has once again responded to changing regulations and customer need to deliver a new mixing valve that greatly simplifies the valve selection process while at the same time enhancing product performance, by blending two valves into one all purpose multi-use TMV.

Traditionally, TMV products have been divided into Type2 (suitable for the domestic market) and Type3 (for environments such as hospitals) which required a more exacting standard; until the recent arrival of The Health Technical Memorandum (HTM04-01) which allows the use of a Type2 valve in certain hospital locations.
    
Pegler Yorkshire considered this Memorandum an opportune moment to innovate in TMVs while providing a solution to it at the same time - combining a Type3 and Type2 into one blended valve still offers all the high performance of a TMV3, yet maintains the lower servicing costs if used in TMV2 environments.

The new valves are fitted with a blue cap (denoting a Type3 TMV) as standard and if the valve is then used as a Type2 – and installed and commissioned as such, then the white cap (denoting Type2 status) can be fitted, thus providing a clear visual indication of how the valve is being used at a glance and what regime needs to be applied for servicing and testing intervals.

Pegler Yorkshire has strived to ensure the new TMV valve would benefit not just the final end user, but distributors, installers and contractors. For the distributor who currently needs to stock 8 variants of TMV, the advent of this new valve from Pegler Yorkshire means they need now only stock four. The advantage is less confusion and reduced costs of stocking.

For installers and contractors, the new valves still retain the ease of service advantages of the old model, but this next generation valve benefits installers further because they can be confident the TMV in their van is of such quality, that it can be used not just in a Type2 environment, but complies with all the requirements for a TMV3 setting too. No matter what the situation, specifiers and installers can now be certain they have the right product for the job – a vital consideration in one area where mistakes can literally cost lives.

“After years of campaigning, TMVs are now recognised by government and installers alike as essential where water needs to be kept hot to prevent the threat of legionella, yet still delivered at a safe temperature at point of use,” said Pegler Yorkshire’s Barrie Plant. “Our new TMV is the culmination of years of know-how in the field - delivering valves with a lower profile and advanced features, yet that still meet the strict tests and standards such products must comply with.”

This new TMV complies with BSEN1111 and BSEN1287 and also meets the BS7942 standard and the Model Engineering Specification, while independent third party testing and approval through the BuildCert TMV2 and BuildCert TMV3 schemes ensures the consistent quality and performance, associated with Pegler Yorkshire valves, is maintained.

For further information about any of Pegler Yorkshire’s products call 01302 560 560, email brochures@pegleryorkshire.co.uk

Pegler Yorkshire Extends Tooling Range

Pegler Yorkshire, the leading UK manufacturer of VSH XPress fittings has expanded its range of tools to meet the demands of the marketplace.  

Pushing the Boundaries - Tectite Receives BSI Kitemark Standard

Pegler Yorkshire has raised the bar by being the first manufacturer to achieve the prestigious BSI Kitemark across its range of push-fit fittings.

PEGLER YORKSHIRE – FIRST TO INTRODUCE LARGE SCALE PRESS FITTINGS INTO UK MARKETPLACE

Pegler Yorkshire has extended its stainless steel XPress Press Fit range of fittings to included sizes up to 168mm - a first for the UK market. 


Put An End To ‘Pressing’ Jobs With A Combined Toolkit

As the rise of more modern jointing techniques such as push and press continues leading manufacturer, Pegler Yorkshire, has launched a combined  toolkit  that gives installers the right equipment to speed up installations.

Tectite makes plumbers’ lives easier – and slashes installation times

Rigorous testing has shown that Pegler Yorkshire’s innovative Tectite push-fit system can cut installation times by up to 75% without sacrificing durability and versatility.

Pegler Yorkshire Launches Essential Tool for HVAC Installers

Pegler Yorkshire has brought to market a tool that no HVAC installer should be without!

The Tectite Tube Straightener exclusively supplied by the company has been launched for 15mm pipe sizes.

Push and Press - Like Two Peas in a Pod

While the plumbing industry continues to debate the merits of both push and press, there has been a noticeable rise in the amount of systems being installed that now benefit from a combined approach.


Tectite Commercial Valve Range Expands

Following the successful launch of the revolutionary new Tectite Flexible Metal plumbing system,  Pegler Yorkshire has announced an addition to its valve range – the Tectite TX300 Full Bore Quarter Turn Lever Ball Valve.

Tectite Flexible Metal System - A Revolution by Pegler Yorkshire

Pegler Yorkshire is pleased to announce the future in domestic plumbing for the UK!  The company has drawn on 125 years of British manufacturing to create the unique Tectite Flexible Metal system, a product like no other on the market.

TMVs Now Boast Tectite Technology

As a continuation of product development by renowned plumbing systems manufacturer Pegler Yorkshire, the company has announced the launch of a new valve.  The Tectite TMV series combine the latest in metal push-fit technology with the ultimate protection against hot water scalding and thermal shock.

Kuterlite delivers PROfessional results every time

When installers need compression fittings that deliver enhanced performance, valves and fittings specialist Pegler Yorkshire has always been the first choice. By operating a policy of unceasing product development, Kuterlite has established itself as the market leader and reputation set to be reinforced further by the improved Kuterlite fitting – the K900-Pro.

The Tectite Push-Fittings Range

The direct benefits derived from using push-fittings including speed of installation, heat and solvent free jointing and the need for only basic tools, can now be realised in more applications and across more pipe types and sizes.

Instant Jointing Techniques By Pegler Yorkshire

Push-fit fittings started to appear in the UK during the 1980s in flexible systems.  Originally established as simple technology only suitable for light duty has now matured and evolved into thoroughly professional metal fitting systems capable of performing at a very high level in a wide range of applications.

Pegler Yorkshire Fitting Raises the ‘Car’ and Vital Funds for Charity

The strength of one of Pegler Yorkshire’s fittings has been put to the test in a David and Goliath experiment on site in Doncaster.

Pegler Yorkshire takes the heat out of the Thermostatic Valves Market with two valves in one

As a recognised innovator and market leader in the field of Thermostatic Mixing Valves (TMV), Pegler Yorkshire has once again responded to changing regulations...

Pegler Yorkshire introduces the XPress sprinkler system to the UK

The Fire Protection market is one place where there can be no compromise when it comes to the quality and integrity of a product.

A TMV Can Make Sense of Part G

Following years of campaigning by charities, trade organisations and manufacturers, the government has now announced that hot water safety will be addressed in the revised edition of the Building Regulations, Part G.

New XPress Gas Range in Satisfying Larger Sizes

Pegler Yorkshire introduces an extension to the XPress copper gas range, with a comprehensive new choice of sizes from 15mm to the extra large 108mm.

New TMV for Pegler Yorkshire

The South Yorkshire based Pegler Yorkshire Group continues to invest in new technology, with several new product launches planned for this year, including a new Thermostatic Mixing Valve (TMV) range, backed by millions of pounds of investment in new machinery throughout the business.

Put Your Faith In The Original Yorkshire Fitting

In today’s competitive marketplace, it is not unusual to see cheap imitation products made available to trap the unwary. While this may not be a problem when buying a pair of jeans, it can raise serious issues when buying products that are needed to perform an essential job.

Save Time and Trouble with A Tectite Sprint Socket Depth Gauge

Pegler Yorkshire has now introduced a unique Tectite Sprint Socket Depth Gauge. This unique three in one device has been designed especially for the Sprint range to make life for the installer as easy and trouble free as possible and allows Tectite Sprint to be prepared and installed speedier than ever!

Why use four fittings when XPress S32 Multi-Port does it in one?

Introducing the XPress S32 Tee, Female Branch Multi-Port from Pegler Yorkshire – the latest product to join the innovative XPress Copper range as part of the company’s policy of continuous product development.

XPress Carbon from Pegler Yorkshire

The XPress Carbon range of press-fit fittings from Pegler Yorkshire includes 67mm fittings, making XPress Carbon the only UK carbon steel press-fit System available in this size.

Reduce Water Wastage With Optiflush

In these days of increasing concerns over water conservation, the Optiflush from Pegler Yorkshire can make a real difference to saving water. Suitable for all pressures from 0.05 bar to 12 bar, the Optiflush can reduce water usage by up to 80%.

© 2017 Pegler Yorkshire. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement

PY Blog RSS RSS twitter facebook link in youtube
Aaberts Industries