K600

Kuterlite

Male coupling, copper x BSP taper male thread

Male coupling, copper x BSP taper male thread

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
6mm x 1/8"K61153005022050051226£12.67
6mm x 1/4"K61153005022050051721£12.67
8mm x 1/8"K61152505022050052919£12.67
8mm x 1/4"K61153005022050052209£12.67
10mm x 1/4"K61154005022050054753£13.20
10mm x 3/8"K61152505022050053497£13.29
10mm x 1/2"K61152505022050054104£13.29
15mm x 1/4"K61151505022050120618£14.85
15mm x 1/2"KS61152005022050120687£4.04
15mm x 3/4"K61151505022050120748£19.53
18mm x 3/4"K61151005022050120533£20.34
22mm x 3/4"KS61151005022050120809£6.37
22mm x 1"KS6115705022050120861£9.19
28mm x 1"K6115505022050121004£14.73
28mm x 1 1/4"K6115305022050121066£58.23
CodeDescriptionaza
41044K6mm x 1/8" K6113118
41045K6mm x 1/4" K6113420
41047K8mm x 1/8" K6113319
41046K8mm x 1/4" K6113118
41050K10mm x 1/4" K6113216
41048K10mm x 3/8" K6113319
41049K10mm x 1/2" K6114022
61053K15mm x 1/4" K6114019
61055K15mm x 1/2" KS6113717
61056K15mm x 3/4" K6114222
61048K18mm x 3/4" K6114421
61059K22mm x 3/4" KS6114119
61060K22mm x 1" KS6114422
61062K28mm x 1" K6114824
61063K28mm x 1 1/4" K6114824
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
6mm x 1/8"K61141044K0.020.128.40
6mm x 1/4"K61141045K0.030.169.90
8mm x 1/8"K61141047K0.030.167.93
8mm x 1/4"K61141046K0.030.148.60
10mm x 1/4"K61141050K0.030.1511.92
10mm x 3/8"K61141048K0.040.2010.01
10mm x 1/2"K61141049K0.050.2713.60
15mm x 1/4"K61161053K0.060.288.71
15mm x 1/2"KS61161055K0.070.3614.72
15mm x 3/4"K61161056K0.090.4413.26
18mm x 3/4"K61161048K0.100.5010.16
22mm x 3/4"KS61161059K0.110.5711.65
22mm x 1"KS61161060K0.170.8411.89
28mm x 1"K61161062K0.180.919.29
28mm x 1 1/4"K61161063K0.231.167.12

Pegler Yorkshire Kuterlite Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler Yorkshire and the final purchaser of the product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:

Kuterlite fittings and valves installed with specified tubes and pipes with the exception of those listed below - 25 years.

Kuterlite Flexifit flexible connectors - 10 years

Kuterlite 600/900 fittings and valves installed with XPress Carbon Steel System tube in sizes up to 28mm - 10 years

Kuterlite 600/900 fittings and valves installed with other manufacturers carbon steel tube to DIN 2394/NEN 1982 in sizes up to 28mm - 5 years

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

SizePattern No.CodeBSi Kitemark LicenseKIWA Kuterlite K600 K900 ProWRAS Kuterlite K600
6mm x 1/8"K61141044Kapproved by BSi Kitemark Licensenot approved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
6mm x 1/4"K61141045Kapproved by BSi Kitemark Licensenot approved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
8mm x 1/8"K61141047Kapproved by BSi Kitemark Licensenot approved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
8mm x 1/4"K61141046Kapproved by BSi Kitemark Licensenot approved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
10mm x 1/4"K61141050Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
10mm x 3/8"K61141048Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
10mm x 1/2"K61141049Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
15mm x 1/4"K61161053Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
15mm x 1/2"KS61161055Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
15mm x 3/4"K61161056Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
18mm x 3/4"K61161048Kapproved by BSi Kitemark Licensenot approved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
22mm x 3/4"KS61161059Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
22mm x 1"KS61161060Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
28mm x 1"K61161062Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
28mm x 1 1/4"K61161063Kapproved by BSi Kitemark Licenseapproved by KIWA Kuterlite K600 K900 Proapproved by WRAS Kuterlite K600
Size-15˚C (Min)30˚C90˚C120˚C (Max)
6mm to 10mm70 bar*70 bar40 bar25 bar
12mm to 28mm20 bar*20 bar10 bar7 bar
35mm to 54mm16 bar*16 bar7 bar5 bar

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Guarantee / Warranty

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

© 2020 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries