Valves

Kuterlite

Chromium plated brass full bore ball valve (green "T" handle). Compression ends to EN 1254/2.CE

Chromium plated brass full bore ball valve (green "T" handle). Compression ends to EN 1254/2.CE

Key Features

  • Copper x Copper
  • Compression ends with ‘T’ handle. Plated brass finish
  • EN331:215 CE Marked
SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) ex VAT
15mmPB300T10805022050450135£38.94
22mmPB300T10405022050450142£53.86
CodeDescriptionABC
4501315mm PB300T7742500.220
4501422mm PB300T8554600.386
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
15mmPB300T450130.252.5420.78
22mmPB300T450140.424.2417.17
SizePattern No.CodeKv m3/h
15mmPB300T4501317.00
22mmPB300T4501441.00
Pegler Yorkshire reserve the right to change specifications

Pegler Yorkshire Kuterlite Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler Yorkshire and the final purchaser of the product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:

Kuterlite fittings and valves installed with specified tubes and pipes with the exception of those listed below - 25 years.

Kuterlite Flexifit flexible connectors - 10 years

Kuterlite 600/900 fittings and valves installed with XPress Carbon Steel System tube in sizes up to 28mm - 10 years

Kuterlite 600/900 fittings and valves installed with other manufacturers carbon steel tube to DIN 2394/NEN 1982 in sizes up to 28mm - 5 years

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

SizePattern No.CodeBSI PB300 PB500 PB700 Ball ValvesWRAS PB300
15mmPB300T45013approved by BSI PB300 PB500 PB700 Ball Valvesapproved by WRAS PB300
22mmPB300T45014approved by BSI PB300 PB500 PB700 Ball Valvesapproved by WRAS PB300
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
PB300T Ball valveNo Minimum Operating Pressure16.0 bar at temperatures up to 30oC5.0 bar at temperatures up to 120oC
SizePattern No.CodePED Categorisation
15mmPB300T45013SEP
22mmPB300T45014SEP
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyForged brass, chrome plated
End pieceForged brass, chrome plated
BallBrass bar, chrome plated (15mm)
Forged brass, chrome plated (22 to 54mm)
StemBrass bar
SeatsPTFE (Teflon)
Stem 'O' ringViton
Lever handleHigh temperature PVC insulated zinc plated steel
Nut (self locking)Zinc plated steel
Tee handleAluminium, painted
Compression nutForged brass, chrome plated
Compression coneBrass
Security screwsNickel plated brass

You must sign in to your My PY account to access specification clauses

loading...
Remember me
 

Register for a My PY account

SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
yesyesyesyesyesyesyesno
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Pressure & Temperature

Installation Instructions

Material Specifications

Technical Suitability

© 2019 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries