Ball Valves

Pegler Valve

Chromium plated brass full bore ball valve (yellow lever handle) PN40

Chromium plated brass full bore ball valve (yellow lever handle) PN40

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/4"PB7001005013866028847£15.11
3/8"PB7001005013866028854£15.11
1/2"PB7001005013866028861£18.48
3/4"PB7001005013866028878£24.97
1"PB700505013866028885£33.49
1.1/4"PB700155022050547224£57.16
1.1/2"PB700125022050547231£74.03
2"PB700125022050547248£122.12
2.1/2"PB700105022050545954£291.09
3"PB700105022050545961£448.58
4"PB700105022050545978£756.29
CodeDescriptionAB
2300011/4" PB700 BRASS BALL VALVE FXF YELLOW48350.16
2300023/8" PB700 BRASS BALL VALVE FXF YELLOW49490.16
2300031/2" PB700 BRASS BALL VALVE FXF YELLOW59390.24
2300043/4" PB700 BRASS BALL VALVE FXF YELLOW68500.44
2300051" PB700 BRASS BALL VALVE FXF YELLOW80550.64
2300061.1/4" PB700 BRASS BALL VALVE FXF YELLOW95621.01
2300071.1/2" PB700 BRASS BALL VALVE FXF YELLOW100781.42
2300082" PB700 BRASS BALL VALVE FXF YELLOW125882.38
2300092.1/2" PB700 BRASS BALL VALVE FXF YELLOW150974.14
2300103" PB700 BRASS BALL VALVE FXF YELLOW1771226.71
2300114" PB700 BRASS BALL VALVE FXF YELLOW21413610.98
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1/4"PB7002300010.161.610.00
3/8"PB7002300020.161.720.00
1/2"PB7002300030.242.580.00
3/4"PB7002300040.444.490.00
1"PB7002300050.643.340.00
1.1/4"PB7002300061.001.005.11
1.1/2"PB7002300071.441.442.91
2"PB7002300082.382.384.80
2.1/2"PB7002300094.144.140.00
3"PB7002300106.716.710.00
4"PB70023001110.9810.980.00
SizePattern No.CodeKv m3/hKv gas
1/4"PB7002300015.903.80
3/8"PB7002300029.404.20
1/2"PB70023000317.0011.30
3/4"PB70023000441.0023.80
1"PB70023000570.0031.10
1.1/4"PB700230006121.0067.20
1.1/2"PB700230007200.00101.50
2"PB700230008292.00148.00
2.1/2"PB700230009535.00-
3"PB700230010850.00-
4"PB7002300111360.00-
Pegler Yorkshire reserve the right to change specifications
SizePattern No.Code01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T BSI PB300 PB500 PB700 Ball Valves
1/4"PB700230001approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
3/8"PB700230002approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
1/2"PB700230003approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
3/4"PB700230004approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
1"PB700230005approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
1.1/4"PB700230006approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
1.1/2"PB700230007approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
2"PB700230008approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
2.1/2"PB700230009not approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
3"PB700230010not approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
4"PB700230011not approved by 01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T approved by BSI PB300 PB500 PB700 Ball Valves
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
PB700 Ball valveNo Minimum Operating Pressure40.0 bar at temperatures up to 110oC10.0 bar at temperatures up to 186oC

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

CE MARKING AND THE ATEX Directive 94/9/EC
cerning equipment and protection systems intended for use in potentially explosive atmospheres.

This has been implemented in United Kingdom law by the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmosphere Regulations 1996(SI 1996/192) and amended by The Equipment and Protective Systems (amendment) Regulations 2001 (SI2001/3766).

The regulations apply to all valves where each valve:

  • has its own potential source of ignition.
  • operates in a potentially explosive atmosphere created by:

  • the presence of air/dust mixtures external to the valve.
  • The presence of gases, vapours, mists released from the valve through leakage.

The regulations will not apply to a valve without a potential source of ignition, which operates in a dust free environment and the fluid being transported is cold, inert gas or non –flammable liquid.

The requisite level of protection for valves not exempt from the regulations is defined as Group II category 2 and shall bear the following markings:

II 2 GD X

SizePattern No.CodePED Categorisation
1/4"PB700230001SEP
3/8"PB700230002SEP
1/2"PB700230003SEP
3/4"PB700230004SEP
1"PB700230005SEP
1.1/4"PB700230006Cat I
1.1/2"PB700230007Cat I
2"PB700230008Cat I
2.1/2"PB700230009Cat I
3"PB700230010Cat I
4"PB700230011Cat I
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyForged Brass, Chrome Plated (1/4" to 2") Gravity Die Cast Brass, Chrome Plated (2.1/2" to 4")
End PieceForged Brass, Chrome Plated (1/4" to 2") Gravity Die Cast Brass, Chrome Plated (2.1/2" to 4")
BallBrass Bar, Chrome Plated (1/4" to 1/2") Forged Brass, Chrome Plated (3/4" to 2") Gravity Die Cast Brass, Chrome Plated (2.1/2" to 4")
StemBrass Bar
SeatsPTFE (Teflon)
Thrust WasherPTFE (Teflon)
Stem O RingViton
Yellow LeverHigh Temperature PVC Insulated Zinc Plated Steel
Nut (Self Locking)Zinc Plated Steel

You must sign in to your My PY account to access specification clauses

loading...
Remember me
 

Register for a My PY account

Please select the correct size

 

SizeCodeFlange Diameter (mm)Pitch Circle Diameter (mm)No of BoltsBolt Diameter (mm)Hole Diameter (mm)Raised Face Diameter (mm)Raised Face Height (mm)Thickness of Flange (mm)
Pegler Yorkshire reserve the right to change specifications
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
yesyesyesyesyesyesyesno
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Spares

Flange Data

Technical Suitability

© 2020 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries