Gate Valves

Pegler Valve

Brass full bore gate valve with lockshield. Compression ends to EN 1254/2, PN16

Brass full bore gate valve with lockshield. Compression ends to EN 1254/2, PN16

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
15mm63LS1005013866016103£33.96
22mm63LS1005013866016110£54.11
28mm63LS155022050546319Disc(Out of Stock)Discontinued03/07/2021
CodeDescriptionAB
50603715MM 63LS BRASS GATEVALVE CW LS CXC72830.31
50603822MM 63LS BRASS GATEVALVE CW LS CXC81930.47
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
15mm63LS5060370.282.840.00
22mm63LS5060380.444.480.00
SizePattern No.CodeKv m3/h
15mm63LS50603714.00
22mm63LS50603832.00
Pegler Yorkshire reserve the right to change specifications
SizePattern No.CodeBSI Gate ValvesKitemarked BS 5154 Pegler ValvesWRAS 63/63LS Gate Valves 2022
15mm63LS506037approved by BSI Gate Valvesapproved by Kitemarked BS 5154 Pegler Valvesapproved by WRAS 63/63LS Gate Valves 2022
22mm63LS506038approved by BSI Gate Valvesapproved by Kitemarked BS 5154 Pegler Valvesapproved by WRAS 63/63LS Gate Valves 2022
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
63LS Gate valveNo Minimum Operating Pressure16.0 bar at temperatures up to 30oC5.0 bar at temperatures up to 120oC

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

This product has been designed in accordance with BS5154 standard.

SizePattern No.CodePED Categorisation
15mm63LS506037SEP
22mm63LS506038-
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyBrass, Gunmetal
BonnetForged Brass
StemBrass Bar
WedgeBrass, Gunmetal
Stem RingBrass Bar
GlandBrass Bar
Gland NutBrass Bar (15 and 22mm), Forged Brass (28 to 54mm)
Compression NutForged Brass, Chrome Plated
Compression ConeBrass
LockshieldBrass Bar
HandwheelAluminium
Handwheel nutBrass bar
Rating discAluminium

Please select the correct size

 

SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesyesnonononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Spares

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries