Gate Valves

Pegler Valve

Brass full way gate valve. Tectite push-fit ends for copper, carbon and stainless steel tube

Brass full way gate valve. Tectite push-fit ends for copper, carbon and stainless steel tube

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
15mmPT10681105022050560711Disc(Out of Stock)Discontinued18/03/2021
22mmPT10681105022050560735Disc(Out of Stock)Discontinued18/03/2021
28mmPT1068155022050560742Disc(Out of Stock)Discontinued17/09/2021
35mmPT1068155022050560759Disc(Out of Stock)Discontinued25/03/2021
42mmPT1068125022050560766Disc(Out of Stock)Discontinued18/03/2021
54mmPT1068125022050560773Disc(Out of Stock)Discontinued17/09/2021
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeKv m3/h
Pegler Yorkshire reserve the right to change specifications
SizePattern No.CodeBSi Kitemark LicenseWRc-NSF Push Fit
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
PT1068 Gate valveNo minimum operating pressure.15-28mm 20 bar up to 30oC 35-54mm 16 bar up to 30oC15-28mm 10 bar up to 114oC 35-54mm 6 bar up to 90oC

No regular aesthetic care is required for this product

A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
Pegler Yorkshire reserve the right to change specifications
BodyForged brass (1/4" to 2")
Gravity die cast brass (2.1\2" to 4")
BonnetForged brass 1\4" to 3")
Gravity die cast brass (4")
StemBrass bar
WedgeForged brass (1\4" to 2.1\2")
Gravity die cast brass (3" to 4")
Stem ringBrass bar
GlandBrass bar
Gland nutBrass bar (1\4" to 1")
Forged brass (1.1\4" to 4")
Handwheel nutBrass bar
Gland packingPTFE
Rating discAluminium
LocksheildBrass bar

You must sign in to your My PY account to access specification clauses

Remember me

Register for a My PY account

SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

Included in your data sheet will be: (Please uncheck the details not required)

General Information


Flow Data


Pressure & Temperature

Care & Maintenance

Installation Instructions


Material Specifications

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries