Gate Valves

Pegler Valve

Forged brass full way gate valve

Forged brass full way gate valve

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/2"10651005013866014741£27.90
3/4"10651005013866014758£34.63
1"1065505013866014765£51.00
1.1/4"1065505013866014772£77.16
1.1/2"1065205013866014789£108.08
2"1065205013866014796£150.31
1/2"1065 AT1005022050233769£27.90
3/4"1065 AT1005022050233806£34.63
1"1065 AT505022050233844£51.00
1.1/4"1065 AT505022050233882£77.16
1.1/2"1065 AT205022050233318£108.08
2"1065 AT205022050233356£150.31
1/2"1065 PT1005022050397652£27.90
3/4"1065 PT1005022050397706£34.63
1"1065 PT505022050397720£51.00
1.1/4"1065 PT505022050397744£77.16
1.1/2"1065 PT205022050397768£108.08
2"1065 PT205022050397782£150.31
CodeDescriptionAB
2020071/2" 106546700.27
2020083/4" 106550800.37
2020091" 106557950.58
2020101.1/4" 1065641150.94
2020111.1/2" 1065681251.19
2020122" 1065811552.09
2020421/2" 1065 AT46700.27
2020433/4" 1065 AT50800.37
2020441" 1065 AT57950.58
2020451.1/4" 1065 AT641150.94
2020461.1/2" 1065 AT681251.19
2020472" 1065 AT811552.09
2020521/2" 1065 PT46700.27
2020533/4" 1065 PT50800.37
2020541" 1065 PT57950.58
2020551.1/4" 1065 PT641150.94
2020561.1/2" 1065 PT681251.19
2020572" 1065 PT811552.09
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1/2"10652020070.262.630.00
3/4"10652020080.373.690.00
1"10652020090.592.930.00
1.1/4"10652020100.954.980.00
1.1/2"10652020111.172.340.00
2"10652020122.114.220.00
1/2"1065 AT2020420.272.710.00
3/4"1065 AT2020430.373.770.00
1"1065 AT2020440.572.950.00
1.1/4"1065 AT2020450.984.890.00
1.1/2"1065 AT2020461.182.430.00
2"1065 AT2020472.084.230.00
1/2"1065 PT2020520.262.630.00
3/4"1065 PT2020530.373.730.00
1"1065 PT2020540.572.900.00
1.1/4"1065 PT2020550.954.980.00
1.1/2"1065 PT2020561.192.460.00
2"1065 PT2020572.084.150.00
SizePattern No.CodeKv m3/hCv - US GPM
1/2"106520200714.00-
3/4"106520200832.00-
1"106520200957.00-
1.1/4"106520201090.00-
1.1/2"1065202011129.00-
2"1065202012230.00-
1/2"1065 AT20204214.0016.40
3/4"1065 AT20204332.0037.40
1"1065 AT20204457.0066.70
1.1/4"1065 AT20204590.00105.30
1.1/2"1065 AT202046129.00150.90
2"1065 AT202047230.00269.10
1/2"1065 PT202052  
3/4"1065 PT202053  
1"1065 PT202054  
1.1/4"1065 PT202055  
1.1/2"1065 PT202056  
2"1065 PT202057  
Pegler Yorkshire reserve the right to change specifications
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
1065 Gate valveNo Minimum Operating Pressure17.5 bar at temperatures up to 93oCNot Suitable for Maximum Hot Working Pressure

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
1/2"1065202007SEP
3/4"1065202008SEP
1"1065202009SEP
1.1/4"1065202010SEP
1.1/2"1065202011SEP
2"1065202012SEP
1/2"1065 AT202042-
3/4"1065 AT202043-
1"1065 AT202044-
1.1/4"1065 AT202045-
1.1/2"1065 AT202046-
2"1065 AT202047-
1/2"1065 PT202052-
3/4"1065 PT202053-
1"1065 PT202054-
1.1/4"1065 PT202055-
1.1/2"1065 PT202056-
2"1065 PT202057-
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyForged Brass
BonnetForged Brass
StemBrass Bar
WedgeForged Brass
Gland ScrewBrass Bar
HandwheelAluminium
Handwheel NutBrass Bar
O RingsNitrile Rubber
Rating DiscAluminium

Please select the correct size

 

SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesyesnonononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Spares

Technical Suitability

© 2020 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries