Gate Valves

Pegler Valve

Bronze full way gate valve BS 5154 PN20 Series B

Bronze full way gate valve BS 5154 PN20 Series B

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/2"1070/1251005013866012594£26.74
3/4"1070/1251005013866012600£36.59
1"1070/125505013866012617£57.39
1.1/4"1070/125205013866012624£86.81
1.1/2"1070/125205013866012631£119.81
2"1070/125205013866012648£183.87
2.1/2"1070/125105022050545558£328.06
3"1070/125105022050545565£433.00
4"1070/125105022050545572£1105.23
1/2"1070/125 PT1005013866012679£32.55
3/4"1070/125 PT1005013866012686£41.84
1"1070/125 PT505013866012693£77.77
1.1/4"1070/125 PT205013866012709£110.94
1.1/2"1070/125 PT205013866012716£153.43
2"1070/125 PT205013866012723£222.76
2.1/2"1070/125 PT105022050545589£421.81
3"1070/125 PT105022050545596£606.61
4"1070/125 PT105022050570345£1657.86
CodeDescriptionAB
1030071/2" 1070/125 GM GATEVALVE52850.32
1030083/4" 1070/125 GM GATEVALVE56950.46
1030091" 1070/125 GM GATEVALVE651100.69
1030101.1/4" 1070/125 GM GATEVALVE731251.03
1030111.1/2" 1070/125 GM GATEVALVE761451.40
1030122" 1070/125 GM GATEVALVE901702.28
1030132.1/2" 1070/125 GM GATEVALVE1022053.68
1030143" 1070/125 GM GATEVALVE1142405.42
1030154" 1070/125 GM GATEVALVE13429010.59
1030471/2" 1070/125 PT GM GATEVALVE52850.32
1030483/4" 1070/125 PT GM GATEVALVE56950.46
1030491" 1070/125 PT GM GATEVALVE651100.69
1030501.1/4" 1070/125 PT GM GATEVALVE731251.03
1030511.1/2" 1070/125 PT GM GATEVALVE761451.40
1030522" 1070/125 PT GM GATEVALVE901702.28
1030532.1/2" 1070/125 PT GM GATEVALVE1022053.68
1030543" 1070/125 PT GM GATEVALVE1142405.42
1030554 1070/125 PT GM GATEVALVE134290155
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1/2"1070/1251030070.323.290.00
3/4"1070/1251030080.464.710.00
1"1070/1251030090.673.580.00
1.1/4"1070/1251030101.012.150.00
1.1/2"1070/1251030111.352.830.00
2"1070/1251030122.244.920.00
2.1/2"1070/1251030133.713.710.00
3"1070/1251030145.395.390.00
4"1070/1251030159.359.350.00
1/2"1070/125 PT1030470.313.210.00
3/4"1070/125 PT1030480.464.730.00
1"1070/125 PT1030490.683.480.00
1.1/4"1070/125 PT1030501.032.060.00
1.1/2"1070/125 PT1030511.362.810.00
2"1070/125 PT1030522.304.600.00
2.1/2"1070/125 PT1030533.723.720.00
3"1070/125 PT1030545.395.390.00
4"1070/125 PT1030559.359.350.00
SizePattern No.CodeKv m3/h
1/2"1070/12510300714.00
3/4"1070/12510300832.00
1"1070/12510300957.00
1.1/4"1070/12510301090.00
1.1/2"1070/125103011129.00
2"1070/125103012230.00
2.1/2"1070/125103013428.00
3"1070/125103014680.00
4"1070/1251030151088.00
1/2"1070/125 PT10304714.00
3/4"1070/125 PT10304832.00
1"1070/125 PT10304957.00
1.1/4"1070/125 PT10305090.00
1.1/2"1070/125 PT103051129.00
2"1070/125 PT103052230.00
2.1/2"1070/125 PT103053428.00
3"1070/125 PT103054680.00
4"1070/125 PT103055 
Pegler Yorkshire reserve the right to change specifications
SizePattern No.CodeKIWA Gate Valves WRAS Pegler 1070/125
1/2"1070/125103007approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
3/4"1070/125103008approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1"1070/125103009approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1.1/4"1070/125103010approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1.1/2"1070/125103011approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
2"1070/125103012approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
2.1/2"1070/125103013approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
3"1070/125103014approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
4"1070/125103015approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1/2"1070/125 PT103047approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
3/4"1070/125 PT103048approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1"1070/125 PT103049approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1.1/4"1070/125 PT103050approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
1.1/2"1070/125 PT103051approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
2"1070/125 PT103052approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
2.1/2"1070/125 PT103053approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
3"1070/125 PT103054approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
4"1070/125 PT103055approved by KIWA Gate Valves approved by WRAS Pegler 1070/125
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
1070/125 Gate valveNo Minimum Operating Pressure20.0 bar at temperatures up to 100oC9 bar at temperatures up to 180oC

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
1/2"1070/125103007SEP
3/4"1070/125103008SEP
1"1070/125103009SEP
1.1/4"1070/125103010SEP
1.1/2"1070/125103011SEP
2"1070/125103012SEP
2.1/2"1070/125103013SEP
3"1070/125103014SEP
4"1070/125103015SEP
1/2"1070/125 PT103047-
3/4"1070/125 PT103048-
1"1070/125 PT103049-
1.1/4"1070/125 PT103050-
1.1/2"1070/125 PT103051-
2"1070/125 PT103052-
2.1/2"1070/125 PT103053-
3"1070/125 PT103054-
4"1070/125 PT103055SEP
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyGunmetal
BonnetForged Brass (1/4" to 3") Gravity Die Cast Brass (4")
StemBrass Bar
WedgeGunmetal
Stem RingBrass Bar
GlandBrass Bar
Gland NutBrass Bar (1/4" to 1") Forged Brass (1.1/4" to 4")
HandwheelAluminium
Handwheel NutBrass Bar
Gland PackingPTFE
Rating DiscAluminum

You must sign in to your My PY account to access specification clauses

loading...
Remember me
 

Register for a My PY account

Please select the correct size

 

SizeCodeFlange Diameter (mm)Pitch Circle Diameter (mm)No of BoltsBolt Diameter (mm)Hole Diameter (mm)Raised Face Diameter (mm)Raised Face Height (mm)Thickness of Flange (mm)
Pegler Yorkshire reserve the right to change specifications
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesyesnonononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Spares

Flange Data

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries