Gate Valves

Pegler Valve

Bronze full way gate valve BS 5154 PN32 series

Bronze full way gate valve BS 5154 PN32 series

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
2"1072 PT205013866050978£250.49
1/2"1072 AT505022050229052£52.51
1011031/2" 1072 GM GATEVALVE641000.47
1011043/4" 1072 GM GATEVALVE651100.69
1011051" 1072 GM GATEVALVE751301.02
1011061.1/4" 1072 GM GATEVALVE901451.57
1011071.1/2" 1072 GM GATEVALVE971652.44
1011082" 1072 GM GATEVALVE1052003.43
1011282" 1072 PT GM GATEVALVE1052003.43
1011431/2" 1072 AT GM GATEVALVE641000.47
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
2"1072 PT1011283.447.000.00
1/2"1072 AT1011430.502.552.55
SizePattern No.CodeKv m3/hCv - US GPM
2"1072 PT101128230.00-
1/2"1072 AT10114314.0016.40
Pegler Yorkshire reserve the right to change specifications

Valves and Fittings

Pegler Yorkshire Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler Yorkshire and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
1072 Gate valveNo Minimum Operating Pressure32.0 bar at temperatures up to 100oC14.0 bar at temperatures up to 198oC

No regular aesthetic care is required for this product

A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

SizePattern No.CodePED Categorisation
2"1072 PT101128-
1/2"1072 AT101143-
Pegler Yorkshire reserve the right to change specifications
Stem RingGunmetal
GlandBrass Bar
Gland NutBrass Bar
Handwheel NutBrass Bar
Gland PackingPTFE
Rating DiscAluminium
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.


You must sign in to your My PY account to access BIM Links

Remember me

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information


Flow Data

Guarantee / Warranty

Pressure & Temperature

Care & Maintenance

Installation Instructions

Material Specifications

Technical Suitability

© 2019 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries