Gate Valves

Pegler Valve

Bronze full way Gate Valve with Lockshield BS 5154 PN20 Series B.

Bronze full way Gate Valve with Lockshield BS 5154 PN20 Series B.

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VATDiscontinuedDate Discontinued
1/2"10751LS1005022050389763Disc(Out of Stock)Discontinued03/07/2021
3/4"10751LS1005022050389787Disc(Stock available)Discontinued03/07/2021
1"10751LS1005022050389800Disc(Stock available)Discontinued20/08/2021
1.1/4"10751LS405022050389824Disc(Out of Stock)Discontinued03/07/2021
1.1/2"10751LS405022050389848Disc(Out of Stock)Discontinued03/07/2021
2"10751LS205022050389862Disc(Stock available)Discontinued03/07/2021
1/2"10751PTLS1005022050411792Disc(Out of Stock)Discontinued17/09/2021
3/4"10751PTLS1005022050411815Disc(Out of Stock)Discontinued17/09/2021
1"10751PTLS1005022050411839Disc(Out of Stock)Discontinued17/09/2021
1.1/4"10751PTLS405022050411921Disc(Stock available)Discontinued17/09/2021
1.1/2"10751PTLS405022050411945Disc(Out of Stock)Discontinued17/09/2021
2"10751PTLS205022050411969Disc(Out of Stock)Discontinued17/09/2021
CodeDescriptionAB
Pegler Yorkshire reserve the right to change specifications
SizePattern No.CodeKv m3/h
Pegler Yorkshire reserve the right to change specifications
SizePattern No.Code10751 Gate ValveNSF Regulation 4
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
10751LS Gate ValveNo Minimum Operating Pressure  

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyCC491K
StemCW602N
Stem BushCW602N
Gland RingCW617N
LockshieldCW614N
BonnetCC491K
WedgeCC491K
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
yesyesyesyesnononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries