Plumbing Valves

Pegler Valve

Float valve, Equilibrium pattern, reduced bore

Float valve, Equilibrium pattern, reduced bore

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1.1/4"901105022050545879£436.33
1.1/2"901105022050545886£458.34
2901105022050545893£772.37
2.1/2"901105022050545909£907.61
3901105022050545916£1471.90
4901105022050545923£1927.74
6901105022050545930£4037.73
CodeDescriptionA BoreBC
5200101.1/4 901 GM EQUILIBRIUM FLOATVALVE1 1/64"1 7/8"10 13/16"3.40
5200111.1/2 901 GM EQUILIBRIUM FLOATVALVE1 3/16"1 7/8"10 13/16"3.44
5200122 901 GUNMETAL EQUILIBRIUM FLOATVALVE1 1/2"2 1/8"11 1/8"5.98
5203002.1/2 901 GM EQUILIBRIUM FLOATVALVE-RB2 1/4"3"19"6.18
5203053 901 GM EQUILIBRIUM FLOATVALVE-RB2 1/2"3 1/2"20"8.80
5203104 901 GM EQUILIBRIUM FLOATVALVE-RB3"4"21"12.20
5203156 901 GM EQUILIBRIUM FLOATVALVE-RB4"5"23"24.50
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1.1/4"9015200103.253.250.00
1.1/2"9015200113.353.350.00
29015200125.585.580.00
2.1/2"9015203004.834.830.00
39015203057.767.760.00
490152031012.1212.120.00
690152031525.6225.620.00

Valves and Fittings

Pegler Yorkshire Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler Yorkshire and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

SizePattern No.CodeWRAS Prestex 901
1.1/4"901520010approved by WRAS Prestex 901
1.1/2"901520011approved by WRAS Prestex 901
2901520012approved by WRAS Prestex 901
2.1/2"901520300approved by WRAS Prestex 901
3901520305approved by WRAS Prestex 901
4901520310approved by WRAS Prestex 901
6901520315approved by WRAS Prestex 901
DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
901 Equilibrium Float valveNo Minimum Operating Pressure10.0 bar at temperatures up to 85oCNot Suitable for Maximum Hot Working Pressure

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

ComponentMaterial
BodyGunmetal
PistonGunmetal
SeatGunmetal
LocknutBrass
Fixed flange backnutGunmetal
Lever heelBrass
Inlet shankGunmetal
Loose backnutGunmetal
Coupling nutGunmetal
End capGunmetal
Piston washerEPDM
O ringNitrile
Piston guideGunmetal
Lever armHT Brass
Sealing washerFibre (non asbestos)
Split pinBrass
Retaining washerStainless steel
Retaining boltStainless steel

Please select the correct size

 

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Pressure & Temperature

Care & Maintenance

Material Specifications

Spares

© 2019 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries