Plumbing Valves
Brass stopvalve (BS 1010) iron wheel, female iron x female iron
Brass stopvalve (BS 1010) iron wheel, female iron x female iron
| Code | Description | A | B | |
|---|---|---|---|---|
| 513042 | 2 744F IW BRASS STOPVALVE CW IW FXF | 130 | 180 | 4.03 |
| 513014 | 3 744F BRASS STOPVALVE FXF | 184 | 230 | 7.90 |
Pegler Yorkshire reserve the right to change specifications
| Size | Pattern No. | Code | Individual Weight (kg) | Pack 1 Weight (kg) | Pack 2 Weight (kg) |
|---|---|---|---|---|---|
| 2" | 744F IW | 513042 | 3.35 | 3.48 | 0.00 |
| 3" | 744F IW | 513014 | 7.37 | 7.37 | 0.00 |
Valves and Fittings
Pegler Yorkshire Customcare 5 Year Guarantee - Terms and Conditions
Products are subject to a 5 year guarantee that is between Pegler Yorkshire and the final purchaser of the product.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.
This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.
The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.
This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.
Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.
Abusive behaviour and accidental damage to the product are not covered by this guarantee.
The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.
Kitemarked BS 1010 : Part 2
[701.3k]
WRAS 744F [824.5k]
| Size | Pattern No. | Code | Kitemarked BS 1010 : Part 2 | WRAS 744F |
|---|---|---|---|---|
| 2" | 744F IW | 513042 |  | |
| 3" | 744F IW | 513014 | |  |
| Description | Minimum Operating Pressure (bar) | Maximum Cold Working Pressure (bar) | Maximum Hot Working Pressure (bar) |
|---|---|---|---|
| 744F IW Stopvalve | No Minimum Operating Pressure | 16.0 bar at temperatures up to 85oC | Not Suitable for Maximum Hot Working Pressure |
Care
No regular aesthetic care is required for this product
Maintenance
No regular maintenance is required for this product.
For any further help please contact the Service Support Team on: 0800 1560050.
Regulations
It is important to ensure that the water supplies to your fittings are connected in accordance with the water regulations (WRAS) requirements and good plumbing practice.
This product has been designed in accordance with BS1010 standard.
Please select the correct size
Included in your data sheet will be: (Please uncheck the details not required)
General Information
Dimensions
Guarantee / Warranty
Approvals
Pressure & Temperature
Care & Maintenance
Regulations
Spares
