Energy Saving


Electronic eye flow control

Electronic eye flow control

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) ex VAT
N/AELECTRONIC EYE (MAINS)105013866079108£287.42
N/AELECTRONIC EYE (BATTERY)105013866079115£252.92
341105Electronic Eye Mains1/2 BSP150 Max60 DiaMin hole 35 Dia6249106106
341106Electronic Eye battery1/2 BSP150 Max60 DiaMin hole 35 Dia6249106106
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
N/AELECTRONIC EYE (MAINS)3411050.970.970.00
N/AELECTRONIC EYE (BATTERY)3411060.840.840.00

5 Year Guarantee

Luxury Taps and Mixers

Pegler Yorkshire Customcare 5 Year Guarantee - Terms and Conditions

Product are subject to a 5 year guarantee that is between Pegler Yorkshire and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear. 

Finishes other than chrome are covered for a period of 3 years only and the guarantee on the finish is subject to the cleaning instructions being followed.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
Electronic eyeNo Minimum Operating PressureNo Maximum Cold Working PressureNo Maximum Hot Working Pressure

To maintain the surface finish, simply wipe occasionally with a mild detergent on a soft damp cloth. Dry, using a soft cloth. Never use abrasive cleaners or chemical household cleaners and avoid contact with concentrated bleach.

No regular maintenance is required for this product.
In case of complete replacement Pegler recommend service valves should be fitted to the supply inlets.

For any further help or replacement parts please contact the Service Support Team on 0800 1560050.

It is important to ensure that the water supplies to your taps and mixers are connected in accordance with the water regulations (WRAS) requirements and good plumbing practice.

If the water flow streams are separate all the way to the outlet of the fitting, then there is no requirement to fit check valves to the cold and hot pipes even if the supply pressures are unbalanced.

It is recommended that in all new and refurbishment installations a thermostatic mixing valve should be installed on the hot inlet supply. The thermostatic mixing valve is designed to prevent scalding when using the hot water supply.

Please select the correct size


Included in your data sheet will be: (Please uncheck the details not required)

General Information


Guarantee / Warranty

Pressure & Temperature

Care & Maintenance

Installation Instructions



© 2018 Pegler Yorkshire. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement

PY Blog RSS RSS twitter facebook link in youtube
Aaberts Industries