Code | Description |
---|---|
631800 | 8/10mm x 1/2" CP TERRIER 3 TRV |
631801 | 15MM x 1/2" CP TERRIER 3 TRV |
Size | Pattern No. | Code | Individual Weight (kg) | Pack 1 Weight (kg) | Pack 2 Weight (kg) |
---|---|---|---|---|---|
8/10mm x 1/2" | Angle Pattern TRV | 631800 | 0.25 | 0.26 | 2.76 |
15mm x 1/2" | Angle Pattern TRV | 631801 | 0.27 | 0.28 | 2.80 |
Thermostatic and Manual Radiator Valves
Pegler Customcare 5 Year Guarantee - Terms & Conditions
Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects and is not applicable where the product is fitted contrary to conditions of use in our literature.
The guarantee is subject to the following limitations:
1. The valves are designed for use only in an indirect open-vented or sealed water-filled central heating and/or indirect hot water system and for no other purpose.
2. They must be used within the pressure and temperature limits stated in the technical information table below.
Operating Conditions (Maximum)
System Water Temperature (at 5bar) : 120 °C
Operating pressure (at 65 oC) :10 bar
3. Under no circumstances must they be used to in systems containing liquids or solutions other than water. The only exception is the addition of a proprietary central heating corrosion inhibitor, cleaner or anti-freeze to the system water in accordance with the manufacturer’s instructions.
4. Damage caused by abusive behaviour and accidental damage to the product are not covered by this guarantee
The extent of Pegler liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.
Keymark License EN215 TRV [753.8k]
Size | Pattern No. | Code | Keymark License EN215 TRV |
---|---|---|---|
8/10mm x 1/2" | Angle Pattern TRV | 631800 | ![]() |
15mm x 1/2" | Angle Pattern TRV | 631801 | ![]() |
Regulations
Terrier thermostatic radiator valves are approved to EN 215. For valves with compression connections, the connections are approved to BS EN1254-2; threaded connections comply with BS 21 or BS 2779.
They are designed for use only in an indirect open-vented or sealed water-filled central heating and/or indirect hot water system and for no other purpose.
They must be used within the pressure and temperature limits stated in the technical information table below.
Operating Conditions | Maximum |
System Water Temperature (at 5bar) | 120°C |
Operating pressure (at 65°C) | 10 bar |
Under no circumstances must they be used in systems containing liquids or solutions other than water. The only exception is the addition of a proprietary central heating corrosion inhibitor, cleaner or anti-freeze to the system water in accordance with the manufacturer's instructions.
Terrier heating controls are manufactured to a strict quality assurance system in accordance with ISO 9000: 2015.
Component | Material |
---|---|
Body | Forged Brass Chrome Plated |
Head | Brass Bar |
Gland | Brass Bar |
Flow Spindle | Stainless Steel |
Capnut | Forged Brass Chrome Plated |
Cone | Brass Bar |
Adaptor | Brass Bar Chrome Plated |
Thermal Head Cover/Body | ABS |
Thermal Head Element/Housing | Lumiloy |
Please select the correct size
 
Included in your data sheet will be: (Please uncheck the details not required)
General Information
Dimensions
Guarantee / Warranty
Approvals
Regulations
Material Specifications
Spares