award-winning dynamic PICV valve

Pegler, the UK leaders in valve technology, has scooped the prestigious Commercial HVAC Product of the Year Award from H&V News for its latest revolutionary dynamic valve.

The driving force behind the global Aalberts integrated piping systems division is the highly experienced Yorkshire-based team that has developed the Pegler Proflow PICV in response to industry challenges.

“The revolutionary Proflow PICV was designed to address common issues found on sites when installing commissioning valves, namely cartridge readjustment and restricted flow velocities; however, its overarching innovation is its status as an isolation and commissioning dynamic valve in one!” commented Sindar Singh, Director of Product Line Valves at Aalberts Integrated Piping Systems UK & ME (Pegler) . “ The key advantage through the innovation of the Pegler Proflow PICV is found in both the installation and commissioning phases - specifically time saved - which equates to 70% less time spent over traditional methods.”

The award-winning dynamic valve offers many more advantages; to assist with ensuring correct flushing velocities are achieved and to remove the risk of system debris, the cartridge in the Pegler Proflow PICV is delivered in a bypass state to ensure a full-bore flush can be completed without the risk of contamination of the cartridge.   Thanks to Its advanced design, there is no need to fully remove the cartridge. Therefore, eliminating any risk of flow rate mix up and with a setting memory in both isolation and bypass mode, the system effectively maintains its previous settings: minimising system fluctuations and increasing performance.

Furthermore, the valve allows the flushing of systems without the need for decommissioning. It has been proven, through rigorous testing, to deliver time-saving efficiencies of over a third and cost-saving efficiencies of over half when compared with competitors’ products. The tests showed that when compared with a traditional PICV, the Pegler Proflow PICV can save up to seven hours of labour, compare this to a typical installation of 60 valves, a saving of up to 396 man-hours can be realised.   Translated into monetary value, this equates to almost a £12,000 saving.

Sindar concluded: “We are honoured to receive such a coveted industry award, and delighted that our hard work in developing products to address key industry challenges is recognised by our peers and will be used to enhance installations and ongoing efficiencies within building HVAC systems.   I would also like to express my sincere thanks to the team who have worked tirelessly to bring to the market such a revolutionary new product.”

A statement from the judging panel said: “Judges were impressed with this very compact and innovative product which should save a lot of maintenance in most installations. They liked the use of the flush bypass, which will reduce any contamination in the installation.

award-winning dynamic PICV valve

award-wining dynamic PICV valve

developing products with 'added value'

developing products with 'added value'

endless opportunities for our young talents

endless opportunities for our young talents 

the evolution of success

the evolution of success

exciting challenges ahead for a young and ambitious individual

exciting challenges ahead for a young and ambitious individual

A Sustainable Pegler

Pegler goes the extra mile to create a sustainable future and business

VSH Tectite - Reliability and Performance across the whole range

The benefits of the whole VSH Tectite range and its heat free jointing, cement its market leading status as a metal push-fit system in the UK

Pegler Health and Safety Week

Health and safety is something that has been at the root of operations since the very beginning at Pegler and so we are holding a health and safety week to maintain traction

Pegler Proflow PICV

Pegler launches its new versatile Pegler Proflow PICV

André in het Veld welcomes Guy Robinson to Pegler

Pegler welcomes Guy Robinson onboard.

Win a Prize Package to British Grand Prix this Summer with Pegler

Contractors are frequently asked to deliver work faster and more cost-effectively than ever before. Removing the risk of squeezed margins while at the same time delivering on time and on budget can be achieved by working closely with building products manufacturers such as Pegler who can support contractors to deliver projects faster, safely and profitably.

Proud of our British heritage and reputation as a tried and trusted manufacturer

It’s been a turbulent few years for British businesses. Some huge names have disappeared from the high street and the next 12 months won’t be any easier for companies, whatever their industry.

Why we issued a challenge to our friends in the media...

At Pegler, we pride ourselves on our reputation for quality and innovation in an industry where product reliability and versatility is demanded. Our jointing solutions span the full range from the tried and trusted traditional to the newer modern methods such as push and press.

Wax vs Liquid for Thermostatic Radiator Valves?

What does a TRV do?

A Thermostatic Radiator Valve (TRV) regulates the flow of water into a radiator according to its setting to control the room temperature.

Pegler Joins Leading Yorkshire Industry Network

Pegler is delighted to announce that we have joined the leading Yorkshire manufacturing and engineering membership group Made in Yorkshire

Pegler supports #noVANber campaign against van and tool theft

Social media is often under the spotlight for the negative things that can happen on Twitter, Facebook and Instagram. But sometimes it can be a force for good too.

Why our totally integrated approach to heating & plumbing systems is better for specifiers & install

Designers and installers of pipe-work systems, whether they are for domestic, commercial or industrial projects, are facing increasing pressure to deliver more cost-effective solutions which optimise performance and conform to exacting quality standards.


As part of our commitment to our local community, we’ve been supporting a number of initiatives designed to help young people make their way in the business world.

More HUGE reasons to choose stainless steel press fittings

By Amy Sedgwick, Market Manager – Press Systems, Pegler Yorkshire.

Following on from her previous post about why stainless steel deserves a leading role in the UK HVAC market, Amy Sedgwick here offers more – and bigger – reasons worthy of consideration by specifiers and contractors of commercial plumbing and HVAC systems…

Swapping the office for the classroom to help develop STEM skills in Doncaster

As part of Pegler Yorkshire’s community engagement activities, Farah Yasin from the Marketing Department went back to school to help out with this year’s TEKK Challenge. Here she describes how the 10-week programme has helped pupils get to grips with science, technology, engineering and maths skills…

Why stainless steel deserves a leading role in the UK HVAC market

As a specifier or contractor of commercial plumbing and HVAC systems you are probably already familiar with the benefits of using stainless steel pipework systems. 

Top 3 reasons to choose Terrier TRVs to control your heating system

As a manufacturer, we know only too well the truth of the saying “you’re only as good as your last performance”. Our customers (and their customers) judge us on their most recent experience of our heating and plumbing solutions, which is one of the reasons we are continually evolving our ranges, as well as our processes, to make sure we provide the very best products and services.

Our BIM Journey: The Story So Far

Clive Gill, Technical Information Administrator, has been responsible for managing the processes we use to share product data with our customers for over 10 years.    He shared his experience of getting to grips with Building Information Modelling (BIM) at last year’s Bathroom Manufacturers Association (BMA) BIM Workshop which took place just before its annual Bathroom and Kitchen Business Conference.

4 reasons to use press-fittings on “live” construction sites

Well over half the work being carried out by heating engineers and contractors is on “live” sites, where traditional jointing methods can add extra workload in terms of paperwork and meeting health and safety requirements. Switching to modern press-fit jointing methods minimises on-site risks and means contractors can get on with the job in hand safely and quickly.

A Spotlight on Careers at Pegler Yorkshire

Interested in working for Pegler Yorkshire? Join our new careers pages on Facebook and Linkedin!

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries