Well over half the work being carried out by heating engineers and contractors is on “live” sites, where traditional jointing methods can add extra workload in terms of paperwork and meeting health and safety requirements. Switching to modern press-fit jointing methods minimises on-site risks and means contractors can get on with the job in hand safely and quickly.
According to research, 69% of plumbing systems currently being installed are for the Repairs, Maintenance & Improvement (RMI) market (source: Ama Research). Healthcare and education are two of the sectors that traditionally dominate, and are forecast to be a significant part of the overall market to 2020.
We asked our Market Manager – Press Systems, Amy Sedgwick for some tips for heating system contractors and engineers that would help them meet the growing demands of public sector specifiers and regulators while ensuring the very highest standard of plumbing work.
1 Hot works permit not required
Many service buildings (schools/hospitals/prisons etc) will not allow the use of a flame on site if the building is in use. If you look at the application form for a hot works permit – you soon get an idea of the huge amount of work that needs to be done to comply. It goes without saying that using VSH XPress or Tectite either gets rid of or minimises the work involved for all these points!
Fire protection systems need to be disabled and possibly extra security provided onsite.
A continuous fire watch needs to be in place.
There needs to be post installation supervision provided for a set period of time.
Personnel who are providing the fire watch need to be trained to do so.
Extra extinguishing equipment (extinguishers/hose reels) needs to be in the immediate vicinity.
Adequate ventilation needs to be provided
Combustible materials (blankets, drapes, screens, curtains) need to be removed from the area.
Surfaces (walls, ceiling, flooring) need to be protected from sparks
Hazardous materials need to be removed (blowtorches, flux, solder etc) once the work has been completed and the area checked.
2 No need to dry out system
Press-fit methods don’t require the system to be dried out so you can install wet. This saves a lot of time when you are working on a RMI project!
3 Same length of guarantee as a traditional system
In fact, on some projects Pegler Yorkshire’s Warranty Plus gives a 25-year guarantee. It means we work on projects from the initial design stages to provide value engineering solutions incorporating Tectite, XPress and valves solutions. We also provide complete training for the installation team which all adds up to give the specifier added peace of mind!
4 Happier, healthier workforce!
Bit of a strange one but... 35,000 cases of work-related skin disorders are diagnosed every year (source: HSE) mostly by workers coming into frequent contact with chemicals in their job. VSH XPress offers clean jointing with no need to use flux or solder (and that has additional benefits for water quality too!). Plus, you get a full bore with no solder build up – better flow rates and less pressure loss too! Win-win.
We’d be interested to hear from any contractors or engineers who have made the switch to metal press-fit technologies, how do you find it?
Contractors are frequently asked to deliver work faster and more cost-effectively than ever before. Removing the risk of squeezed margins while at the same time delivering on time and on budget can be achieved by working closely with building products manufacturers such as Pegler who can support contractors to deliver projects faster, safely and profitably.
It’s been a turbulent few years for British businesses. Some huge names have disappeared from the high street and the next 12 months won’t be any easier for companies, whatever their industry.
At Pegler, we pride ourselves on our reputation for quality and innovation in an industry where product reliability and versatility is demanded. Our jointing solutions span the full range from the tried and trusted traditional to the newer modern methods such as push and press.
Pegler is delighted to announce that we have joined the leading Yorkshire manufacturing and engineering membership group Made in Yorkshire.
Social media is often under the spotlight for the negative things that can happen on Twitter, Facebook and Instagram. But sometimes it can be a force for good too.
Designers and installers of pipe-work systems, whether they are for domestic, commercial or industrial projects, are facing increasing pressure to deliver more cost-effective solutions which optimise performance and conform to exacting quality standards.
As part of our commitment to our local community, we’ve been supporting a number of initiatives designed to help young people make their way in the business world.
By Amy Sedgwick, Market Manager – Press Systems, Pegler Yorkshire.
As part of Pegler Yorkshire’s community
engagement activities, Farah Yasin from the Marketing Department went back to
school to help out with this year’s TEKK Challenge. Here she describes how the
10-week programme has helped pupils get to grips with science, technology,
engineering and maths skills…
As a specifier or contractor of commercial plumbing
and HVAC systems you are probably already familiar with the benefits of using
stainless steel pipework systems.
As a manufacturer, we know only too well
the truth of the saying “you’re only as good as your last performance”. Our
customers (and their customers) judge us on their most recent experience of our
heating and plumbing solutions, which is one of the reasons we are continually
evolving our ranges, as well as our processes, to make sure we provide the very
best products and services.
Clive Gill, Technical Information Administrator, has been responsible for managing the processes we use to share product data with our customers for over 10 years. He shared his experience of getting to grips with Building Information Modelling (BIM) at last year’s Bathroom Manufacturers Association (BMA) BIM Workshop which took place just before its annual Bathroom and Kitchen Business Conference.
Well over half the work being carried out by heating engineers and contractors is on “live” sites, where traditional jointing methods can add extra workload in terms of paperwork and meeting health and safety requirements. Switching to modern press-fit jointing methods minimises on-site risks and means contractors can get on with the job in hand safely and quickly.