Pegler Yorkshire


According to a recent survey, 32 per cent of energy customers in the UK are adamant that gas and electricity tariffs are unaffordable. Unfortunately, prices are set to rise further, and with over 60 per cent of household energy bills based on heating costs consumers need to act now to save money this winter!

How can we do this cost effectively without shelling out hundreds and hundreds of pounds on cavity wall and loft insulation or solar panels?  A simple solution is to change our heating habits.  Instead of heating the whole house when really only a couple of rooms are being used at any one time, ensure the radiators are turned off in the rooms not in use.  

Some thrifty and even environmentally conscious consumers will already change their thermostatic radiator valves (TRVs) depending on their particular requirements, but most will leave them set at a high of 5 (29 degrees). But managing the temperature in this way inevitably leads to inefficiencies, as not all the rooms in a home are used all the time.

Herein lies a simple solution, the Terrier i-temp a Programmable Radiator Control (PRC).  Costing about £25 this devise simply replaces the common TRV found on most radiators and gives the homeowner control over the time and temperature of each individual radiator.  This means that even though a heating system is ‘on’, radiators can now been automatically and individually turned off, when not required, ensuring less energy is used.

For example, a typical family will heat their whole house, during the morning, although may only require heat in the bedrooms, bathroom and kitchen, the heat emitting from the radiators in other rooms is then wasted.  The Terrier i-temp PRC will allow for each individual radiator to be set at a specific temperature and time therefore keeping in tune with the residents own routine and reducing the energy used and ultimately heating bills.

In fact, the Energy Savings Trust has recognised the big energy savings the Terrier i -temp can make leading it to be the first PRC of its kind to be included in the organisation’s list of recommended products.

Innovative products can sometimes be daunting for users however being user friendly has been key for the development of the Terrier i-temp that is why programming has been simplified in a walkthrough process.  Using an easy to view LCD screen it offers pre programmes for bedroom and sitting room or a customisation program. Either way the PRC can be installed or programmed within minutes.

“This is a very cost effective product ideally suited to a home or even office environment,” commented Sindar Singh product market manager Pegler Yorkshire, the Yorkshire based company behind the product. “Significant investment combined with over 100 years of heating experience has been used to develop this innovative PRC to address important issues such as heat wastage, reducing carbon emissions and most importantly saving money.”

Terrier i -temp requires no complicated installation, and fits easily to most popular TRVs. Compared to other energy saving installation methods, Terrier i-temp will save time and money and its performance payback could be realised within just eight months.

For further information about the Terrier i-temp, how it works, how to install, how to save money and where to buy visit,  The product is now available at a variety of stockists (see online for details) sold individually or you can upgrade your whole house (based on 8 units) for less than £200 with the Terrier i-temp and reap the pay back rewards in just eight months.

Energy Saving Product that the Design Conscious Must Have

With over 70 percent of UK households still not benefitting from the savings offered by thermostatic radiator valves (TRVs), leading UK manufacturer Pegler Yorkshire has put its knowledge and expertise to the test and developed a range of decorative TRVs which would appeal to the more design conscious consumer.

"A" Rating is a Minimum for Terrier TRV

The renowned Terrier TRV, by leading manufacturer Pegler Yorkshire, has been given an A rating under the European TELL product classification system for the thermostatic radiator valve industry.


As the winter months descend, and we crank up our heating systems, the ubiquitous issue of never ending increasing fuel tariffs raises its ugly head once again.

i-temptations as trio of new i-temp accessories deliver Terrier-ific

Less than 12 months since the launch of the innovative i-temp leading valves and fittings manufacturer Pegler Yorkshire announces not one, but three additions to the i-temp range.


The future of controlling room temperature is set to change thanks to the latest technology developed by market leader Pegler Yorkshire.

Decorative Radiator Valves from Pegler Yorkshire

As one of the world’s leading suppliers of thermostatic and manual radiator valves, Pegler Yorkshire is always at the forefront of the latest developments in the industry. A range of decorative radiator valves is now available that combine elegance with the reliable performance associated with Pegler Yorkshire.

The Terrier Push-Fit Range from Pegler Yorkshire

The Terrier Push-Fit range of products combine the push-fit technology of Yorkshire Fittings with the years of Pegler know-how that has gone into Terrier. Developed with the needs of the New Build market in mind, Terrier Push-Fit has the quality of product and speed of installation required, while still remaining competitive on price.

© 2019 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries