Pegler Yorkshire Logo

Reducer larger end male for insertion into fitting x push-fit

T6/T243 Reducer

Reducer larger end male for insertion into fitting x push-fit

Key Features

  • Tectite male connectors have either taper BSP threads to ISO 7 (formerly BS 21) or BSP threads to BS EN IS0 228:2003. Inert Jointing compounds or PTFE tape should be applied to taper threads and good quality jointing washers should be used with parallel
SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
12 x 10mmT6/T243102005022050003584£5.57
15 x 10mmT6/T243101505022050003645£1.94
15 x 12mmT6/T243101505022050003690£5.72
18 x 15mmT6/T24351005022050454249£4.50
22 x 12mmT6/T24351005022050003737£3.60
22 x 15mmT6/T24351005022050003751£2.57
22 x 18mmT6/T24351005022050003805£5.09
28 x 15mmT6/T2435505022050003829£7.14
28 x 22mmT6/T2435505022050004253£7.37

T6/T243 Reducer

Reducer larger end male for insertion into fitting x push-fit dimensions
4541012 x 10mm T6/T243101224212103
4541615 x 10mm T6/T243101522262122
4541815 x 12mm T6/T243121524222302
4542418 x 15mm T6/T243151824222630
4542522 x 12mm T6/T243122222302321
4542622 x 15mm T6/T243152222302621
4543022 x 18mm T6/T243182222302921
4543528 x 15mm T6/T243152822332621
4543828 x 22mm T6/T243222823333461
Pegler Yorkshire reserve the right to change specifications

Pegler Tectite Sprint, Classic, Pro and 316 Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler and the final purchaser of the product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:

25 Years Where Tectite Sprint, Tectite Classic, Tectite Pro and Tectite 316 fittings, Tectite-PEX barrier pipe and 316 System tube are installed in pipelines with products from other manufacturers, they are guaranteed for 25 years.

30 Years Where pipelines are constructed exclusively using Tectite fittings and recommended tubes, the resulting installations will be deemed Tectite Systems and qualify for a 30 year guarantee.

Qualifying systems are:

  • Tectite Sprint fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Classic fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Pro fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite 316 fittings and stainless steel 316 System tube.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

Tectite FittingTube/pipe used withMin Temperature  Max Temperature
ClassicCopper-24˚C* at 16bar30˚C at16bar65˚C at 10bar95˚C at 6bar
ClassicPB/PEX-20˚C* at 12bar20˚C at 12bar65˚C at 6bar92˚C at 3bar

No regular aesthetic care is required for this product


No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

BodyDZR Brass
O ringEPDM
Pipe guideGlass filled nylon 6
Demount collarAcetal copolymer
Grab ringStainless steel