Pegler Yorkshire Logo

Ductile iron butterfly valve. Fully lugged, to BS EN 593:2004, face to face dimensions to BS EN 558:2008

V905 Butterfly valve

Ductile iron butterfly valve. Fully lugged, to BS EN 593:2004, face to face dimensions to BS EN 558:2008
SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
65mmV905105022050554482£186.74
80mmV905105022050554604£214.17
100mmV905105022050554734£309.01
125mmV905105022050554741£453.48
150mmV905105022050554826£492.74
200mmV905105022050555120£1086.13

V905 Butterfly valve

Ductile iron butterfly valve. Fully lugged, to BS EN 593:2004, face to face dimensions to BS EN 558:2008 dimensions
CodeDescriptionABCD
1530065mm V90546701812005.80
1530180mm V90546891872006.00
15302100mm V9055210621129010.30
15303125mm V9055612022629013.50
15304150mm V9055613223929014.60
15305200mm V9056016429345021.40
Pegler Yorkshire reserve the right to change specifications
SizePattern No.CodeKv m3/h
65mmV90515300229.32
80mmV90515301353.34
100mmV90515302702.00
125mmV905153031195.74
150mmV905153041847.43
200mmV905153053669.12
Pegler Yorkshire reserve the right to change specifications

Pegler 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

ComponentMaterial
BodyDuctile iron
ShaftStainless steel
DiscStainless steel
Bushes uo to 100mmPTFE
Bushes uo to 125mmGunmetal
'O' ringEPDM
LinerEPDM
SizeCodeFlange Diameter (mm)Pitch Circle Diameter (mm)No of BoltsBolt Diameter (mm)Hole Diameter (mm)Raised Face Diameter (mm)Raised Face Height (mm)Thickness of Flange (mm)
65mm153001851454 (2)M1619--20
80mm153012001608M1619--22
100mm153022201808M1619--24
125mm153032502108M1619--26
150mm153042852408M2023--26
200mm1530534029512M2023--30
Pegler Yorkshire reserve the right to change specifications
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesnononononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.